Direktlänk till inlägg 13 februari 2011
Dags för Logun Penetrator
Efter de lätt nedslående försöken med JSBs båda populäraste sorter, 16 resp 18 gn, så går jakten vidare med Logun Penetrator. Kanske dessa lite tyngre diaboler kan hålla effektutvecklingen hos Rapiden i schack och ge lite bättre träffbilder?
Genomsnitt: 25.78 mm
Även här blev resultatet dessvärre nedslående, drygt 25 mm är inget acceptabelt resultat. En jämn, till synes slumpmässig fördelning att träffarna i varje träffbild indikerar klart att detta inte är rätt diabol för just den här Rapiden. Även här fick jag hålla över en dot på de tre sista träffbilderna för att inte kana av tavlan. De tyngre diabolerna tenderade ändå att göra detta på den sista träffbilden, med den höga effektnivån så räcker helt enkelt inte luften ända fram..
Nu dags för Royale:
Genomsnitt: 21.33 mm
Ett bättre resultat, om än inte lika bra som JSB Heavy under gårdagen. Jag har dock tidigare legat under 20.00 mm även med Penetrator, dock inte denna gång som synes. Den här diabolen brukar landa på andra eller tredje plats av de sorter som just min Royale föredrar.
Nu ska jag ut o testa HN Baracuda för att se om detta är rätt recept, Baracudan är ju trots allt en diabol from Tyskland, liksom Rapidens pipa (Anschutz), det kanske kan fungera ändå?
Under natten så har jag dessutom frågat runt lite på diverse olika forum för åsikter/teorier om varför Rapiden inte har lyckats prestera bättre. Här är lite av åsikterna:
"Could be the 40 fpe
Lots a guys over here that shoot benchrest with the 18.1gr JSB have found best accuracy at around 29-32fpe."
IHD - Yellow Forum
"Agree..
I turned mine down from 40 ft lbs and it responded well. Way more consistent over the chrono too as well as lots more shots per fill. It's also much quieter."
Scott - Yellow Forum
"At that power and velocities wind deflection becomes a real issue, even in light breeze.
Especially at your present winter low temperatures. I'm thinking your temperature is probably not much above O deg C outside.
If this is the case: Without making this into a long story Johnny, I suggest that if there is any semblance of cross wind or head wind, reduce the power down to 870 fps - 30.4 fpe with 18.1 gr Exacts and 26.7 fpe or thereabouts for 15.9 gr Exacts. These figures approximate Mach 0.80 at zero deg C ... Go a little higher if the temp is above zero C and a little lower if it is below zero C deg.
Otherwise if there is absolutely no wind at all, or some following wind, you can add some to that velocity.
In perfect conditions, or with wind from behind these pellets can be pushed along to quite high velocity and still get precision grouping. The pellets themselves can take the hit.
Try it and see. ............... Kind regards, Harry."
Harry Fuller - Yellow Forum
"Bytt pipe. Det er det eneste som vil hjelpe.
Om ikke JSB går bra, så går ingenting bra."
Egon Olsen - AGW Forum